Ppp Timeout - Motorola BSR 64000 Reference Manual

ppp timeout

The ppp timeout command sets the maximum timeout period from the start of a PPP
negotiation request to a response from the remote host. The no ppp timeout
command restores the default maximum timeout period.
Use the ppp timeout command to set the timeout period for PPP negotiation.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ppp timeout {ncp 1-2147483> | retry 0-2147483>}
no ppp timeout {ncp | retry}
Command Syntax
ncp 1-2147483
retry 0-2147483
Command Default
10 seconds
amount of time, in seconds, configured before
timing out from lack of response at the NCP
layer
amount of time, in seconds, configured before
timing out from lack of response at the LCP
layer
POS Commands
15-23