Logging Reporting - Motorola BSR 64000 Reference Manual

logging reporting

The logging reporting command sets the recording mechanism for CMTS messages.
Group Access
All
Command Mode
Global Configuration
Command Line Usage
logging reporting {alert | critical | debug | emergency | error | information | notice
| warning} {all-clear | all-set | local | local-localvol | local-syslog |
local-syslog-localvol | local-trap | local-trap-localvol | local-trap-syslog | localvol |
syslog-localvol | trap-localvol | trap-syslog-localvol}
no logging reporting {alert | critical | debug | emergency | error | information |
notice | warning} {all-clear | all-set | local | local-localvol | local-syslog |
local-syslog-localvol | local-trap | local-trap-localvol | local-trap-syslog | localvol |
syslog-localvol | trap-localvol | trap-syslog-localvol}
The available logging report options are listed below:
alert
critical
debug
emergency
error
information
notice
warnings
Logs conditions where immediate action is needed (severity level 1).
Logs critical conditions (severity level 2).
Logs debugging messages (severity level 7).
Logs emergency conditions where the system is unusable (severity level
0).
Logs error conditions (severity level 3).
Logs informational descriptive system information (severity level 6).
Logs normal but significant conditions (severity level 5).
Logs warning conditions (severity level 4).
System Administration Commands
1-41