BSR 64000 Command Reference Guide
cable upstream channel-width
Use the cable upstream channel-width command to configure the upstream channel
width. Use the no cable upstream channel-width command to return the upstream
channel width to the default value.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable upstream [<port>] channel-width <width>
no cable upstream [<port>] channel-width <width>
Command Syntax
port
width
Command Default
3.2 MHz or 3200000 Hertz
13-80
Upstream port number.
The upstream channel width in Hertz (Hz);
valid entries are 200000, 400000, 800000,
1600000, or 3200000.