BSR 64000 Command Reference Guide
neighbor update-source loopback
The neighbor update-source loopback command allows an internal BGP session to
use any loopback interface for the TCP session. The no neighbor update-source
loopback command blocks a BGP session from using a loopback interface for the
TCP session.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
neighbor {<A.B.C.D> | <WORD>} update-source loopback <1-16>
no neighbor {<A.B.C.D> | <WORD>} update-source loopback <1-16>
Command Syntax
A.B.C.D
WORD
loopback
1-16
Command Default
best local address
16-46
neighbor IP address
name of BGP peer group
loopback interface
loopback interface number