BSR 64000 Command Reference Guide
ip ospf authentication-key
The ip ospf authentication-key command assigns a password for use by neighboring
OSPF routers that are using OSPF simple password authentication. The no ip ospf
authentication-key command deletes the password assigned for use by neighboring
OSPF routers that are using OSPF simple password authentication.
Note: All neighbor routers on the same network need the same password to
exchange OSPF information.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip ospf authentication-key <password>
no ip ospf authentication-key <password>
Command Syntax
password
8-20
character string up to 8 bytes in length