Ip Host - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

ip host

The ip host command is used to add a static, classless DNS host entry to the ip
hostname table by matching the host IP address to its DNS host name mapping. The
no ip host command deletes the host address-to-name mapping in the host cache.
Note: The initial character of the name must be a letter.
Group Access
ISP
Command Mode
Global Configuration
Command Line Usage
ip host <name> <address>
no ip host <name> <address>
Command Syntax
name
address
Command Default
no hosts configured
2-28
name of host
IP address