BSR 64000 Command Reference Guide
cable insert-interval
The insertion interval is the fixed time period available for CM initial channel request.
The cable insert-interval command is used to set the insertion interval for CM initial
channel request. The no cable insert-interval command is used to return the default
insertion interval.
Note: Ensure that the upstream port is down before setting the insertion
interval.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable insert-interval <number>
no cable insert-interval <number>
Command Syntax
number
Command Default
The default insertion interval is 20.
13-24
The insert interval; valid entries are 0 to 200.
The default insert interval is 20.