Cable Modem Qos Dsc Service-Flow - Motorola BSR 64000 Reference Manual

cable modem qos dsc service-flow

The cable modem qos dsc service-flow triggers a DSC initiated by the CMTS for a
specified cable modem.
cable modem <ip-address> | <cable modem mac-address> qos dsc service-flow
<TFTP server ip-address> <config-filename>
Command Syntax
ip-address
cable modem mac-address CM MAC address
TFTP server ip-address
config-filename
Command Default
none
Command Mode
Privileged EXEC
Command Notes
The definition of the dynamic service is defined in a binary file that conforms to the
DOCSIS cable modem configuration file format. This configuration file is saved in /
tftpboot directory on a TFTP server with known IP address. The current
implementation is only the change of service based on service-flow (not the flow
classifier, nor the payload-header-suppression).
Syntax
Command Use
Use this command with extreme caution where the operator provides the correct
dynamic service definition in the configuration files and applies to the specific
service-flow identifiers. The configuration file has to include the right service flow id
used by the service flow that needs to be changed.
cable modem
TFTP server IP address
binary file
CMTS Commands
13-37