BSR 64000 Command Reference Guide
ip pim spt-threshold lasthop
Use the ip pim spt-threshold lasthop command to specify the the multicast traffic
threshold that must be reached on the last-hop router before multicast traffic is
switched over to the Shortest Path Tree (SPT).
Group Access
ISP
Command Mode
Global Configuration
Command Line Usage
ip pim spt-threshold lasthop {<0-4294967294> | infinity }
no ip pim spt-threshold lasthop
Command Syntax
0-4294967294 the multicast traffic rate in kilobits per second (kbps)
infinity
Command Default
1024 kbps
17-14
indicates that the rendezvous point (RP) is always used