Ip Vrrp Enable - Motorola BSR 64000 Reference Manual

ip vrrp enable

The ip vrrp enable command enables a given virtual router on a configured interface.
The no vrrp enable command disables a given virtual router on a configured
interface.
Use the ip vrrp enable command to bring up a specific VRRP router on the given
interface if the interface is being enabled. This command brings the VRRP router to
either Backup or Master when the router is being enabled (if at least one IP address is
configured for the virtual router).
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip vrrp <1-255> enable
no ip vrrp <1-255> enable
Command Syntax
1-255
Command Default
enabled
the identification number of a configured
virtual router
VRRP Commands
10-9