Snmp-Server Access - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

snmp-server access

The snmp-server access command defines access policy information. The no
snmp-server access command clears the SNMP access policies.
When using the no snmp-server community command and a view is not specified, a
default view is set to the "dod" MIB group, for example "1.3.6".
Note:
v2c.
Group Access
System Administrator
Command Mode
Global Configuration
Command Line Usage
snmp-server access <group-name> {v1 | v2c | v3 noauth | v3 auth | v3 priv} [prefix
<prefix-name>]
no snmp-server access <group-name> {v1 | v2c | v3 noauth | v3 auth | v3 priv}
[prefix <prefix-name>]
Command Syntax
snmp-server
access
group-name
v1
v2c
3-18
Community Name Access Method is used predominantly with SNMPv1 and
change SNMPv3-related parameters
define access information
group name
access group using v1 security model
access group using v2c security model