Show Cable Modem Registered - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

show cable modem registered

The show cable modem registered command displays the following information
about registered cable modems:
Interface
Prim Sid
Connect State
Timing Offset
Rec Power
Ip address
Mac address
Cable modem connectivity states are as follows:
online
online(d)
online(un)
online(pk)
online(pt)
reject(r)
13-118
cable modem interface with active
connection
Primary Service Identifier number
describes the connectivity state of a cable
modem. The table below describes the 20
cable modem connectivity states
supported on the BSR
current cable modem timing adjustment.
cable modem receive downstream power
level in dbmv
cable modem IP address
cable modem Media Access Control layer
address
CM registered; enabled for data.
CM registered, but network access for the
CM is disabled.
CM registered, but not enabled data. Fail
to verify modem's identity by BPI module.
CM registered; baseline privacy interface
(BPI) enabled, and key encryption key
(KEK) is assigned.
CM registered; BPI enabled, and traffic
encryption key (TEK) is assigned.
CM did attempt to register, registration
was refused due to unavailable resource.