Cable Modem Qos Dsa - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

cable modem qos dsa

The cable modem qos dsa command triggers a dynamic service change (DSC)
initiated by the CMTS for a specified cable modem. The DSC is in a binary file that
conforms to the DOCSIS cable modem configuration file format. This configuration
file is saved in the TFTP "boot" directory on a TFTP server with a known IP address.
The current implementation has only the change of service based on service-flow (not
the flow classifier, nor the payload-header-suppression).
Note: The definition of the dynamic service is defined in a binary file that
conforms to the DOCSIS 1.1 cable modem's configuration file format. This
configuration file is saved in the TFTP "boot" directory on a TFTP server with
known IP address.
Warning: This command should be used with extreme caution as the
dynamic service definition in the configuration file will be overwritten.
Group Access
MSO
Command Mode
Privileged EXEC
Command Line Usage
cable modem <ip-address> | <mac-address> qos dsa < TFTP server ip-address>
<config-file name>
Command Syntax
ip-address
mac-address
13-34
Specified cable modem IP address to create or
delete a SID.
Starts CM Dynamic Service Addition MAC
address of the specified cable modem.