Neighbor Distribute-List - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

neighbor distribute-list

The neighbor distribute-list command distributes BGP neighbor information based
on the access list. The no neighbor distribute-list command deletes an entry.
Use the neighbor distribute-list command to filter BGP advertisements. Also, use
the ip as-path access-list and the neighbor filter-list commands to use as-path filters
to filter BGP advertisements. If a BGP peer group is specified, all members of that
group are associated. Specifying the neighbor distribute-list command with an IP
address to replace the value already in the peer group.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
neighbor {<A.B.C.D> | <WORD>} distribute-list <1-199> {in | out}
no neighbor {<A.B.C.D> | <WORD>} distribute-list <1-199> {in | out}
Command Syntax
A.B.C.D
WORD
1-199
in
out
16-28
neighbor IP address
name of a BGP peer group
number or name of a standard or extended
access list between 1 and 1999
within the group
outside the group