BSR 64000 Command Reference Guide
cable downstream frequency
The cable downstream frequency command is used to set the fixed center
downstream frequency for RF output. The no cable downstream command returns
the fixed center downstream frequency of RF output to the default.
Note: The digital carrier frequency cannot be the same as the video carrier
frequency.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable downstream [<port>] frequency [down-freq-Hz]
no cable downstream [<port>] frequency [down-freq-Hz]
Command Syntax
port
down-freq-hz
Command Default
555000000 Hz
13-10
Downstream port number.
The downstream carrier center frequency.
Valid values are from 91000000 to
857000000 Hertz (Hz) for North American
DOCSIS and from 100000000 to 858000000
Hz.