Cable Upstream Map-Interval - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

cable upstream map-interval

The cable upstream map-interval command is used to determine the time interval in
microseconds for bandwidth maps messages (MAP) to be used by the CM to allocate
upstream time slots. The no cable upstream map-interval command resets the
upstream interval to the default.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable upstream <port> map-interval <num>
no cable upstream <port> map-interval <num>
Command Syntax
port
num
13-64
Upstream port number.
Interval value in microseconds, 2000 to
16000.