show cable modem cpe
The show cable modem cpe command displays the following Customer Premises
Equipment (CPE) information for all cable interfaces, a particular upstream port, or a
specific CPE:
Interface
PSID
CM MAC
CM IP
CPE MAC
CPE IP
Count
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
show cable modem [<mac>] cpe
show cable modem cpe [<X/Y>] [upstream [<0-7>]] [ | ] [ begin | include | exclude]
[<WORD>]
the downstream cable interface and upstream
port the cable modem is connected to
the upstream Primary SID number associated
with this cable modem
the cable modem's MAC address
the cable modem's IP address
the MAC address of a CPE device connected
to the cable modem displayed in the
command output
the IP address of a CPE device connected to
the cable modem displayed in the command
output
the CPE count per cable modem
CMTS Commands
13-107