Ip Domain-Name - Motorola BSR 64000 Reference Manual

ip domain-name

For each BSR, you should configure the name of the domain in which the BSR is
located. This is the default domain name that is appended to host names that are not
fully qualified. The ip domain-name command is used to configure a domain name.
The no ip domain-name command removes the domain name.
Group Access
ISP
Command Mode
Global Configuration
Command Line Usage
ip domain-name {<domain>}
no ip domain-name {<domain>}
Command Syntax
domain
Command Default
No domain is configured.
name of domain being established
IP Commands
2-25