Default-Information Originate - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

default-information originate

The default-information originate command generates a default route into an OSPF
routing domain by configuring the metric for redistributed routes and is used with the
redistribute command to redistribute routes into an OSPF routing domain so they are
included in an automatic Autonomous System Border Router (ASBR) summary.
The no default-information originate command removes default routes from the
OSPF routing domain.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
default-information originate [always] [metric <value>] [metric-type <num:1,2>]
no default-information originate [always] [metric <value>] [metric-type
<num:1,2>]
Command Syntax
always
metric value
metric type num:1,2
8-14
Always advertises the default route into the
OSPF domain regardless of whether the
routing table has a default route.
OSPF default metric from 0 to 16777214 to
generate default route.
External link type associated with the default
route advertised into the OSPF routing
domain, values are 1 and 2, 1 being
comparable to the link state metric and 2
larger than the cost of intra-AS path.