Cable Upstream Force-Frag - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

cable upstream force-frag

The cable upstream force-frag command is used as a traffic shaping tool that forces
the CM to fragment large upstream packets. When a CM sends a request to the CMTS
for a large data grant that exceeds the configured minislot threshold, the CMTS grants
the CM the configured minislot threshold, which forces the CM to make another data
grant request for the remaining data, thereby causing data packets in the original grant
to be fragmented by the CM.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable upstream [<port>] force-frag <num:0-255>
no cable upstream [<port>] force-frag <num:0-255>
Command Syntax
port
num
Command Default
The force fragmentation feature is set to 0 for no forced fragmentation of large data
grants.
13-60
Upstream port number.
Configured minislot threshold without
fragmentation for large data grants from 0 to
255.