BSR 64000 Command Reference Guide
isis retransmit-interval
When LSPs are dropped, LSPs are retransmitted. The isis retransmit-interval
command is used to set the number of seconds between retransmission of each LSP
for point-to-point links.
Note: The number of seconds should be greater than the expected round-trip
delay between any two routers on the attached network. Set this parameter
conservatively to avoid unnecessary retransmission. Increase the number of
seconds for networks that have serial lines and virtual links.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
isis retransmit-interval {<1-65535>}
no isis retransmit-interval {<1-65535>}
Command Syntax
1-65535
18-18
the number of seconds between LSP
retransmissions.