BSR 64000 Command Reference Guide
timers spf
The timers spf command configures the amount of time between OSPF topology
change receipt and when it starts a shortest path first (SPF) calculation. This includes
the hold time between two consecutive SPF calculations. The no timers spf command
changes the configuration of the amount of time between OSPF topology changes
receipt and when it starts an SPF calculation and returns it to the default value.
Use the timers spf command to set the delay time and hold time to change routing to
a faster path.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
timers spf <spf-delay> <spf-holdtime>
no timers spf <spf-dela>y <spf-holdtime>
Command Syntax
spf-delay
spf-holdtime
Command Default
SPF delay 5 seconds
SPF hold time 10 seconds
8-42
time in seconds between receipt and SPF
minimum time in seconds between two
consecutive SPF calculations