cable upstream data-backoff
Use the cable upstream data-backoff command sets data back-off value to assign
automatic or fixed start and stop values. Use the no form of this command to return to
the default data back-off value.
Note: The automatic setting is recommended.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable upstream <port> data-backoff {automatic | <start> <end>}
no cable upstream <port> data-backoff {automatic | <start> <end>}
Command Syntax
port
automatic
start
end
The upstream port number.
Automatic data-backoff.
0 to 15
0 to 15
CMTS Commands
13-59