Cable Downstream Annex - Motorola BSR 64000 Reference Manual

cable downstream annex

The downstream MPEG framing format is set to DOCSIS (Annex B) by default.
Check local standards to determine whether your region uses the European DOCSIS
or North American DOCSIS standard.
Note: The CMs connected to the downstream port must be set to the same
MPEG framing format as the cable interface.
The no cable downstream command returns the downstream MPEG framing format
setting to the default.
If your region uses the European DOCSIS standard, use the cable downstream
annex command to enable the European DOCSIS downstream MPEG framing. This
command is used with sub-commands of the cable downstream command. The
sub-commands are the downstream RF output frequency command and the
interleave depth command.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable downstream [<port>] annex {a | b}
no cable downstream [<port>] annex {a | b}
Command Syntax
port downstream port number
CMTS Commands
13-7