Ip Vrrp Verify-Availability - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

ip vrrp verify-availability

The ip vrrp verify-availability command configures one or more ip addresses for a
virtual router to monitor as critical link states. The no ip vrrp verify-availability
command deletes one or more of the designated IP address from the virtual router.
Use the ip vrrp verify-availability command to configure a virtual router to monitor
a link state of another interface. If a virtual router is not monitoring any link state
where no IP address is configured for verify-availability, the virtual router will
continue as usual. If one or more IP addresses is configured for monitoring, and all of
the monitored links are down, the virtual router is brought down automatically. The
Master relinquishes responsibility by sending an advertisement 0. If at least one link
of all monitored IP addresses being monitored comes back up, the associated virtual
router will be brought back up automatically.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip vrrp <1-255> verify-availability <A.B.C.D> [...<A.B.C.D>]
no ip vrrp <1-255> verify-availability <A.B.C.D> [...<A.B.C.D>]
Command Syntax
num:1-255
A.B.C.Ds
...A.B.C.D
10-14
the identification of a configured virtual
router number
IP address this virtual router monitors
additional IP addresses that this virtual router
monitors