Set Metric-Type - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

set metric-type

The set metric-type command sets the metric type for the destination routing
protocol. The no set metric-type command disables the metric type set for the
destination routing protocol.
Use the route-map command to set the type of metric for the route imported by OSPF
into its domain.
Group Access
ISP
Command Mode
Route Map Configuration
Command Line Usage
set metric-type {external | internal | type-1 | type-2}
no set metric-type {external | internal | type-1 | type-2}
Command Syntax
external
internal
type-1
type-2
Command Default
disabled
6-16
IS-IS external metric
use IGP metric as the MED for BGP
OSPF external type 1 metric
OSPF external type 2 metric