match route-type external
The match route-type external command is used to match the type of OSPF routes.
The no match route-type external clears the match condition.
Group Access
ISP
Command Mode
Route-map Configuration
Command Line Usage
match route-type external [level-1 | level-2 | type-1 | type-2]
no match route-type external [level-1 | level-2 | type-1 | type-2]
Command Syntax
type 1
type 2
level-1
level-2
matches only type 1 external route (OSPF)
matches only type 2 external route (OSPF)
IS-IS level-1 route
IS-IS level-2 route
Routing Policy Commands
6-11