Debug Ip Udp - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

debug ip udp

The debug ip udp command displays UDP-based transactions.The debug output
shows whether packets are being received from the host. The no debug ip udp
command turns off UDP debugging.
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
debug ip udp [dhcp [<mac>]]
no debug ip udp [dhcp [<mac>]]
Command Syntax
dhcp
mac
Command Default
disabled
4-34
display Dynamic Host Configuration Protocol
(DHCP) packet information
client hardware/MAC address in the form of
xxxx.xxxx.xxxx