default-metric
The default-metric command sets the default metric value for redistribution of routes
from one domain into another. The no default-metric command removes the set
default value for metric.
Use the default-metric command with the redistribute command to enforce the
same metric value for all redistributed routes.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
default-metric <1-4294967295>
no default-metric [<1-4294967295>]
Command Syntax
1-4294967295
Command Default
A built-in automatic metric translation for each routing protocol
default metric value; the range of values
depends on the routing protocol for which this
is configured; for RIP 1 to 16, OSPF and BGP
from 1 to 4294967295
Routing Policy Commands
6-5