neighbor weight
The neighbor weight command establishes a weight to a neighbor connection. The
no neighbor weight command removes a weight to a neighbor connection.
Note: Initially, all routes learned from this neighbor will have the assigned
weight. The route with the highest weight is chosen as the choice route when
multiple routes are available on the network.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
neighbor {<A.B.C.D> | <WORD>} weight <0-65535>
no neighbor {<A.B.C.D> | <WORD>} weight <0-65535>
Command Syntax
A.B.C.D
WORD
0-65535
Command Default
learned routes, 0
routes sourced by local router, 32768
neighbor IP address
name of BGP peer group
weight assignment
BGP Commands
16-47