Access-List (Standard) - Motorola BSR 64000 Reference Manual

access-list (standard)

The access-list (standard) command defines a standard access list to configure and
control the flow of routing information and traffic by matching a packet with a permit
or deny result. The no access-list command deletes the access-list.
Use the access-list command to restrict routing update information; control the
transmission of packets on an interface, or control virtual terminal line access.
Group Access
ISP
Command Mode
Global Configuration
Command Line Usage
access-list <1-99> <1300-1999> {deny | permit} {<A.B.C.D> [<A.B.C.D>] | any |
host <A.B.C.D>}
no access-list <1-99> <1300-1999>
Command Syntax
1-99
1300-1999
deny
permit
A.B.C.D
A.B.C.D
any
host A.B.C.D
standard access list
standard IP access list (expanded range)
deny access if conditions are matched
permit access if conditions are matched
address to match
wildcard bits
any source host
a single source host
Access List Commands
5-3