BSR 64000 Command Reference Guide
clear counters
The clear counters command is used to clear a specific counter or all interface
counters.
clear counters [ethernet <slot>/<interface> cable <slot>/<interface> | loopback
<loop number> | pos <slot>/<interface> | gigaether <slot>/<interface> | tunnel
<tunnel number> | <cr>]
Command Syntax
cable
ethernet
loopback
loop number
tunnel
tunnel number
pos
gigaether
interface
slot
cr
Command Mode
Privileged EXEC
2-8
Clears the cable interface counters.
Clears the Ethernet interface counters.
Clears the loopback interface counters.
Loopback interface number from 1 to 16.
Clears the tunnel interface counters.
Tunnel interface number from 0 to 255.
Clears the Packet over SONET (POS)
interface counters.
Clears the Gigabit Ethernet interface
counters.
Identifies the port number.
Identifies the module slot number.
A command return clears all interface
counters.