Set Community - Motorola BSR 64000 Reference Manual

set community

The set community command add or replace communities from the community
attribute of an inbound or outbound update. Use the no set community command
removes the specified communities from the set.
Use the route-map command, and the match and set commands to configure the rules
for redistributing routes from one routing protocol to another. Each route-map
command has a list of match and set commands associated with it. The match
commands specify the match criteria, which are the conditions under which
redistribution is allowed for the current route-map command. The set commands
specify the set actions, the particular redistribution actions to perform if the criteria
enforced by the match commands are met. The no route-map command deletes the
route map.
Note: The communities could be specified as numbers; the result will be the
same; none removes community attribute from the update unless additive is
specified for the set entry. In this case it doesn't modify update community
attributes.
In other words, the no set community command, if the entry had some
community numbers in it before removal, and as the result of the removal no
numbers are left, then the entry itself is deleted.
The command set community none removes all community numbers from
set entry, if any, but leaves the value of the additive attribute intact.
Group Access
ISP
Command Mode
Route-map Configuration
BGP Commands
16-55