Cable Sync-Interval - Motorola BSR 64000 Reference Manual

cable sync-interval

The synchronization message interval is the interval between successive
synchronization message transmissions from the BSR CMTS interface to the CMs.
The cable sync-interval command sets the nominal time between transmission of
SYNC messages on the downstream channel.
Note: Ensure that the interface is down before setting the synchronization
message interval.
The no cable sync-interval command resets the default.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable [<port>] sync-interval <value>
no cable [<port>] sync-interval <value>
Command Syntax
port
value
Command Default
10
Downstream port.
Integer between 0 and 200 in milliseconds.
CMTS Commands
13-27