Cable Upstream Physical-Delay - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

cable upstream physical-delay

The CMTS physical delay function is used to adjust the upstream propagation delay
threshold between the CMTS and cable modems (CMs). The CMTS adjusts the
physical delay function automatically by default.
The cable upstream physical-delay command is used to set fixed or automatic
physical delay parameters. You can use the following options to adjust the physical
delay function:
•
A single fixed time can be set for physical delay.
•
Physical delay parameters can be configured so that they are adjusted
automatically by the BSR when you specify the automatic option with a specified
minimum and maximum microsecond range.
•
If you do not want to specify a range for the automatic option, select the
automatic option only.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable upstream <port> physical-delay {automatic [<min-msecs> | <max-msecs> |
<cr>] | <msecs>}
no cable upstream <port> physical-delay {automatic [min-msecs | max-msecs |
<cr>] | <fixed-msecs>}
Command Syntax
automatic
port
13-68
Automatic physical delay in microseconds.
Upstream port number.