Cable Modulation-Profile - Motorola BSR 64000 Reference Manual

cable modulation-profile

Modulation profile 1 and 2 are the default upstream modulation profiles containing
upstream burst parameters. Modulation profile numbers 1 or 2 can be modified, or
new upstream modulation profiles can be created for the CMTS interface.
Group Access
MSO
Command Mode
Global Configuration
Command Line Usage
Use the cable modulation-profile command to create an individual modulation
interface profile for upstream burst parameters. This modulation profile can be
applied to an upstream port using the cable upstream modulation-profile command
in Interface Configuration mode.
cable modulation-profile {<profile> <iuc> <fec-tbytes> <fec-len> <burst-len>
<guard-t> <mod> <scrambler> <seed> <diff> <pre-len> <last-cw> <uw-len>
<range-check>}
Use the no cable modulation-profile to remove all modulation profiles except for
modulation profiles 1 and 2.
-or-
Use the no cable modulation-profile <profile> command to remove a specific
modulation profile number.
Command Syntax
profile
iuc (Interval Usage Code) Enter initial, long, request, short, or station.
Modulation profile group number from 1 to
16.
CMTS Commands
13-41