redistribute
You can advertise networks by redistributing routes learned from one routing protocol
into another. The redistribute command is used to redistribute a BGP, OSPF, RIP, or
static route into the IS-IS routing process.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
redistribute {bgp | connected | ospf | rip | static}
no redistribute {bgp | connected | ospf | rip | static}
Command Syntax
bgp
connected
ospf
rip
static
iIndicates a BGP route
indicates a connected route
indicates an OSPF route
indicates a RIP route
indicates a static route
IS-IS Commands
18-23