Page 2
(such as translation, transformation or adaptation) without written permission from Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Page 3
Caring for the Environment by Recycling When you see this symbol on a Motorola product, do not dispose of the product with residential or commercial waste. Recycling your Motorola Equipment Please do not dispose of this product with your residential or commercial waste. Some countries or regions, such as the European Union, have set up systems to collect and recycle electrical and electronic waste items.
Page 4
Motorola Kundeservice. Milieubewust recycleren Als u dit symbool op een Motorola-product ziet, gooi het dan niet bij het huishoudelijk afval of het bedrijfsafval. Uw Motorola-materiaal recycleren. Gooi dit product niet bij het huishoudelijk afval het of bedrijfsafval. In sommige landen of regio's zoals de Eu- ropese Unie, zijn er bepaalde systemen om elektrische of elektronische afvalproducten in te zamelen en te recycleren.
Page 5
Motorolas kundtjänst för hjälp. Újrahasznosítással a környezet védelméért Ha ezt a jelzést látja egy Motorola terméken, ne dobja ki azt lakossági vagy ipari hulladékba. Motorola termékének újrahasznosítása Kérjük ne dobja ki ezt a terméket lakossági vagy ipari hulladékba. Egyes országok ill. régiók, mint az Európai Unió...
Contents Preface Scope .............................ix Audience............................ix Documentation Set ........................ix Conventions............................ x Notes, Cautions, Warnings ......................xi If You Need Help..........................xii Introduction to the Simple Network Management Protocol Overview .............................1-1 About SNMP MIBs ........................1-2 SNMP Commands........................1-3 How a MIB is Organized......................1-3 Defining MIB Objects ......................1-4 Obtaining SNMP MIB Archive Files for the BSR..............1-5 Standard MIB Support Overview .............................2-1...
Page 8
BSR 2000 SNMP MIB Reference Guide Release 1.0 Motorola Private MIBS Overview .............................3-1 MIB Traps Overview .............................4-1 Accessing MIB traps with a DOCSIS Name..............4-1 Accessing MIB traps with RFC Numbers ................4-2 DOCSIS and Standard MIB Trap Information................4-3 Motorola Private Trap Information .....................4-5 Trap Severity Levels ........................4-8...
Scope This document provides descriptions of the standard SNMP and private MIBs supported by the Motorola™ Broadband Services Router™ 2000 (BSR 2000™). It also provides a tutorial on how to “walk” the MIBs using an SNMP MIB browser and provides example tasks that can be performed using the SNMP or private MIBs.
This document provides instructions and procedures for troubleshooting the BSR product. BSR 2000 Quick Start Guide This document provides basic tasks used to get the BSR 2000™ out of the box, running, connected to the network, and operational. Conventions This document uses the conventions in the following table:...
Release 1.0 Preface Convention Example Explanation italic text boot system <filename> Italic type indicates variables for which you supply values in command syntax descriptions. It also indicates file names, directory names, document titles, or emphasized text. This font indicates system output. screen display Wed May 6 17:01:03 2000...
1-888-944-4357 Outside the U.S. +.215-323-0044 Motorola Online http://businessonline.motorola.com The TRC is on call 24 hours a day, 7 days a week. In addition, Motorola Online offers a searchable solutions database, technical documentation, and low-priority issue creation and tracking. MGBI 526362-001-00...
Introduction to the Simple Network Management Protocol Overview The Simple Network Management Protocol (SNMP) is described in the following sections: About SNMP MIBs SNMP Commands How a MIB is Organized Obtaining SNMP MIB Archive Files for the BSR 526362-001-00 MGBI...
BSR 2000 SNMP MIB Reference Guide Release 1.0 About SNMP MIBs Request for Comments (RFC) 1155 defines the Structure of Management Information (SMI) framework for using SNMP to control different types of information. SMI places objects as nodes in an object tree. The object tree groups logically related objects into subtrees.
Modifies the values of MIB objects. The BSR 2000 private MIBs and several objects in the standard MIBs allow you to configure the BSR 2000 from an SNMP management station on the network. How a MIB is Organized Because networking devices are made by a variety of manufacturers they must all be able to communicate with one another.
BSR 2000 SNMP MIB Reference Guide Release 1.0 Some objects may occur multiple times for a single device. Objects of this type are called tabular objects and are organized in tables. Each occurrence of a tabular object is called an instance, and each instance also numerically encoded. For example, if you were querying a two-port bridge’s interface table, there would be two instances...
::= { interfaces 1 } Obtaining SNMP MIB Archive Files for the BSR Contact Motorola Technical Response Center (TRC) to obtain the SNMP MIB archive files for use with the BSR 2000 Release 4.1 software. Refer to If You Need Help on page xii for more information.
Overview This chapter gives instructions on how to access standard MIBs and provides information for the standard MIBs supported by the BSR 2000: Accessing MIBs with RFC Numbers Follow these steps to access MIBs with Request for Comments (RFCs) numbers: 1.
BSR 2000 SNMP MIB Reference Guide Release 1.0 2. Find the CableLabs MIB name in and enter it in the Search field and click the Search button. The document displays as a PDF in your Web browser. MIB II Table 2-1...
Page 21
Release 1.0 Standard MIB Support Table 2-1 Supported MIB II Groups RFC/MIB Name IETF Working Group Title RFC 2578 SNMPv2 Structure of Management Information Version 2 (SMIv2) RFC 2579 Textual Conventions for SMIv2 RFC 2863 Interfaces MIB The Interfaces Group MIB IF-MIB CLAB-DEF-MIB IP over Cable Data Network...
Page 22
BSR 2000 SNMP MIB Reference Guide Release 1.0 Table 2-1 Supported MIB II Groups RFC/MIB Name IETF Working Group Title DOCS-CABLE-DEVI IPCDN (continued) Trap definitions for DOCSIS cable devices CE-TRAP-MIB DOCS-SUBMGT-MI RFC-version of Subscriber Management MIB RFC 2669 DOCSIS Cable Device MIB Cable Device...
Release 1.0 Standard MIB Support Table 2-1 Supported MIB II Groups RFC/MIB Name IETF Working Group Title RFC 2932 IETF IDMR IPv4 Multicast Routing MIB IPMROUTE-STD-MI RFC 3291 Operations and Textual Conventions for Internet Network Addresses INET-ADDRESS-MI Management Area RFC 3289 Differentiated Services Management Information Base for the Differentiated Services Architecture...
BSR 2000 SNMP MIB Reference Guide Release 1.0 SNMP Table 2-3 provides a list of MIB Request for Comments (RFCs) and/or MIB names for the SNMP group, which includes their corresponding Internet Engineering Task Force (IETF) working groups and document titles:...
Release 1.0 Standard MIB Support Experimental Table 2-4 provides the MIB Request for Comment (RFC) for the Experimental group, which includes their corresponding Internet Engineering Task Force (IETF) working group and document title: Table 2-4 Supported Experimental Groups RFC/MIB Name IETF Working Group Title RFC 2934 IDMR...
Overview This chapter gives instructions on how to access both standard and private MIB traps that are supported by the BSR 2000. Accessing MIB traps with a DOCSIS Name Follow these steps to access DOCSIS-related MIB trap names through CableLabs: 1.
BSR 2000 SNMP MIB Reference Guide Release 1.0 Accessing MIB traps with RFC Numbers Follow these steps to access MIB traps with Request for Comments (RFCs) numbers: 1. Click on the blue World Wide Web link to access an RFC from the Internet Engineering Task Force (IETF) Web site: http://www.ietf.org/rfc.html...
Table 4-1 displays a description and the DOCSIS and Standard MIB file names that are supported by the BSR 2000. The Associated Traps Column provides the trap names for each DOCSIS and Standard MIB file: Table 4-1 DOCSIS and Standard MIB Traps...
BSR 2000 SNMP MIB Reference Guide Release 1.0 Table 4-2 Motorola Private Traps MIB File Trap Name rdn-evtNotifications.mib rdnEvtUpcRegTaskMonFailure (continued) rdnEvtUpcRxUnexpectedMsgType rdnEvtUpcRxUnexpectedMsgSubType rdnEvtUpcSemCreateFailure rdnEvtSvcfloNullPtr rdnEvtSvcfloWriteNextFlowTlvError rdnEvtSvcfloSidInsertFailure rdnEvtUbshaCollectionRspMallocError rdnEvtUbshaTaskSuspended Trap Severity Levels Table 4-3 describes the trap severity levels that are described in this book from 1,...
Page 39
Release 1.0 MIB Traps Table 4-3 Trap Severity Levels Level Severity Description ormal but significant conditions - an event of importance occurred which notifications is not a failure informational Informational descriptive system messages - an unimportant event, which could be helpful for tracing normal operations 526362-001-00 MGBI...
Table 4-5 describes the Motorola Private SNMP trap enable and disable flags and their associated CLI commands. Refer to the BSR 2000 Command Reference Guide for more detailed configuration information pertaining to these commands: Table 4-5 Enabling or Disabling Trap Flags using their associated CLI commands...
Filtering Traps Table 4-6 describes the SNMP trap filter tables and their associated CLI commands. Refer to the BSR 2000 Command Reference Guide for more detailed configuration information pertaining to these commands: Table 4-6 Using the CLI to Filter Traps...
Using a MIB Browser to Access MIB Variables Overview This chapter provides a brief overview of using a graphical interface MIB browser including: Basic procedures for using the browser The SNMP Get, GetNext, and Set commands The rationale behind updating a MIB database. Note: The information and procedures provided use a “generic”...
BSR 2000 SNMP MIB Reference Guide Release 1.0 About MIB Browsers With a MIB browser, you can examine the MIBs supported by an active device on your network and perform SNMP Get, GetNext, and Set commands on the MIB objects.
Release 1.0 Using a MIB Browser to Access MIB Variables Browsing the MIB Tree A graphical MIB browser provides an interface that lets you query any SNMP device on your network and examine its supported MIBs. The MIB information is visually structured into a tree format, similar to a directory tree.
Page 48
BSR 2000 SNMP MIB Reference Guide Release 1.0 Figure 5-2 shows that the iso –> org –> dod –> internet branch has been opened. Each folder icon changes and is marked with a minus sign (-) to denote that it has been expanded.
Release 1.0 Using a MIB Browser to Access MIB Variables Figure 5-3 shows the MIB tree further expanded to reveal a management object (leaf), specifically the iso -> org -> dod -> internet -> mgmt -> mib-2 -> system -> sysDescr object iso (1) org (3)
BSR 2000 SNMP MIB Reference Guide Release 1.0 SNMP Set With a MIB browser, you can change the value of a writable object in a device’s MIB. If you attempt to change the This is accomplished with an SNMP Set command.
Release 1.0 Using a MIB Browser to Access MIB Variables Accessing MIB Variable Information To find the current value set at the selected device for a specific MIB object or set of objects, the MIB browser issues an SNMP Get command (to retrieve a specific piece of management information) or SNMP Get Next command (to traverse a portion of the tree and retrieve all its information).
Page 52
BSR 2000 SNMP MIB Reference Guide Release 1.0 3. In the MIB tree display, navigate through the MIB hierarchy until you reach the mib-2 folder (Figure 5-4) iso (1) org (2) dod (6) internet (1) mgmt (2) Navigate to the...
Page 53
Release 1.0 Using a MIB Browser to Access MIB Variables 5. Open the system folder to display the objects in the system group (Figure 5-5). iso (1) org (2) dod (6) internet (1) mgmt (2) mib-2 (1) Open the mib-2 and system folders system (1) sysDescr (1)
Page 54
BSR 2000 SNMP MIB Reference Guide Release 1.0 6. Select the sysUpTime object (Figure 5-6). iso (1) org (2) dod (6) internet (1) mgmt (2) mib-2 (1) system (1) sysDescr (1) sysObjectID (2) Select the sysUptime (3) sysUpTime object sysContact (4)
Release 1.0 Using a MIB Browser to Access MIB Variables All or part of the following should be retrieved and displayed for the sysUpTime object: Object Name sysUpTime Object ID 1.2.6.1.2.1.1.3 Type TimeTicks Access read-only Description The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
Page 56
BSR 2000 SNMP MIB Reference Guide Release 1.0 Follow these steps to change the value of the rdnSyslogClear object on a device: 1. Start your MIB browser. 2. Connect to the device of interest by specifying the device’s IP address and community name.
Page 57
Release 1.0 Using a MIB Browser to Access MIB Variables 5. Open the syslog folder to display the objects in the syslog group (Figure 5-8). iso (1) org (2) dod (6) internet (1) private (4) enterprises (1) Open the rdn (4981) rdn folder cmts (2) Open the...
Page 59
Release 1.0 Using a MIB Browser to Access MIB Variables 7. Set the rdnSyslogClear object to “TRUE”. Note: The exact procedure for changing an object’s value through a MIB browser interface depends on the particular MIB browser application that you are using.