Reset Ip & Ethernet Configuration - Motorola PTP 48600 User Manual

User Guide: PTP 600 Series
Recovery mode options
Options in recovery mode are as follows:
•
Load new main application software.
•
Reset all configuration data to factory default. This option resets IP and Ethernet
configuration, and erases (zeroizes) critical security parameters.
•
Reset IP and Ethernet configuration to factory default.
•
Erase (zeroize) critical security parameters.
•
Reboot with existing software and configuration.
NOTE
The recovery software image is installed during manufacture of the ODU and cannot
be upgraded by operators.
For detailed instructions on using the recovery mode, see
page 7-20.
phn-0896_009v003
Feb 2010
If recovery mode has been entered either because of a checksum error, by
default the ODU will reboot with existing software and configuration
following a 30 second wait.
UNDER DEVELOPMENT
System management
Using recovery mode on
1-51