IP Phone Administrator Guide
Firmware and Configuration Files
Firmware and Configuration Files
Description
When the IP phone is initialized for the first time, DHCP is enabled by default.
Depending on the type of configuration server setup you may have, the IP phone
may download a firmware version and configuration files automatically, or you
may need to download it manually.
The firmware consists of a single file called:
•
<phone model>.st (for example, 55i.st) - This file contains information about
the specific IP Phone model and contains the language packs to load to the
phone.
The configuration files consist of two files called:
•
aastra.cfg - This file contains configuration information about the IP Phone.
•
<MAC>.cfg (for example, 00085D1610DE.cfg) - This file contains
configuration information about the IP Phone.
The following table provides the files that the phone requests from the
configuration server during bootup of the phone:
IP Phone Model
Associated Firmware
9143i
9143i.st
9480i
9480i.st
9480i CT
9480iCT.st
51i
51i.st
53i
53i.st
55i
55i.st
57i
57i.st
57i CT
57iCT.st
1-36
Note: Automatic download is dependant on your configuration server
setup.
Configuration Files
aastra.cfg
<MAC>.cfg
(for example, 00085D1610DE.cfg)
lang_de.txt
lang_es.txt
lang_es_mx.txt (Mexican Spanish)
lang_fr.txt
lang_fr_ca.txt
lang_it.txt
Language Files
(German)
(Spanish)
(French)
(Canadian French)
(Italian)
41-001160-01, Rev 00, Releaes 2.3