Locking/Unlocking The Phone; Administrator Passwords - Aastra 6730i Administrator's Manual

6700i series, 6800i series, 9000i series
Hide thumbs Also See for 6730i:
Table of Contents

Advertisement

Operational Features

Administrator Passwords

An administrator can change the administrator passwords on the phone using the configuration files only.
An administrator can also assign a password for using the Options key on the IP phone. You turn this feature on and off
by entering the "options password enabled" parameter followed by a valid value in the configuration files. Valid values
are 0 (false; Options key not password protected), or 1 (true; Options key password protected). If this parameter is set to
1, a user has to enter a password at the IP phone UI. If the password is entered correctly, the user is allowed to gain access
to the Options Menu and no more password prompts display for other password protected screens. If the user fails to
enter the correct password in three attempts, access to the Options Menu is denied and the IP phone returns to the idle
screen.
Changing the Administrator Password
Use the following procedure to change the administrator password.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,

Locking/Unlocking the Phone

A user or administrator can lock a phone to prevent it from being used or configured. Once the phone is locked, the user
or administrator can enter their password to unlock the phone.
You can lock/unlock a phone using the configuration files, the IP Phone UI, or the Aastra Web UI.
You can use any of the following methods to lock/unlock a phone:
Using the IP Phone UI at the path Options->Lock.
Using the Aastra Web UI via the path Operation->Phone Lock.
Using the configuration files to configure a softkey as "phonelock", and then pressing the key to lock/unlock the
phone.
Using the Aastra Web UI to configure a softkey as "Phone Lock", and then pressing the key to lock/unlock the phone.
Note:
All of the methods above configure locking/unlocking of the phone dynamically. Once configured, the feature takes
affect immediately. To unlock the phone, a user or administrator must enter their password.
5-7
"Password Settings"
on
page A-14.
41-001343-02 REV05 – 07.2014

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents