Tftp Server Settings; Sip Settings; Setting Parameters Through Configuration Files - Aastra 480i CT Administration Manual

TFTP Server Settings

The 480i CT phone uses the TFTP to
download updates of the phone's
firmware and configuration files. You
must set the TFTP server address in
the phone.
From the 480i CT Phone:
1. Press the £ button to enter
the Options List.
2. Select option 8. Network.
3. Enter the administrator's password.
The default password is 22222.
4. Select option 6. TFTP Server to
change the TFTP server.
From the Web Client:
1. Click on the Network sub-category
under the ADMIN main category.
2. Enter the administrator user name
and password (the default user name
is "admin" and password is "22222").
3. In the TFTP field, enter the IP
address of the TFTP server.
4. Click on the Set Values button to
save the changes that you just made.

SIP settings

The 480i CT uses the information in
the SIP settings to register at the IP
PBX. To configure the SIP settings:
From the 480i CT Phone:
1. Press the £button to enter
the Options List.
2. Select option 9. SIP Settings.
3. Enter the administrator's password.
The default password is 22222.
4. Select options 1-4 to change the
information about the registrar and
the proxy server.
5. Select option 5. User Name to change
the user name.
6. Select option 6. Screen Name to
change the screen name.
7. Select option 7. Auth. Name to
change the authorization name.
8. Select option 8. Password to change
the user's password.
7 Model / Administration Guide
From the Web Client:
1. Click on the SIP Settings sub-
category under the ADMIN main
category.
2. Enter the administrator user name
and password (the default user name
is "admin" and password is "22222").
3. In the web page that just opened
enter the appropriate information.
4. Click on the Set Values button to
save the changes that you just made.
Note: At this point modifications performed
to the User name, Screen name,
Authentication name and Password
affect line 1 of the 480i CT only. Modi-
fications to the other lines should be
done through the <mac>.cfg file. The
NAT IP Address and NAT Port are
currently not supported and will
have no effect when set.
Setting Parameters through
Configuration Files
The following are the parameters that
can be used to configure the 480i CT
phone through the configuration files
– aastra.cfg and <mac>.cfg. The
"aastra.cfg" file configures the settings
server wide, while the <mac>
configures only the phones with the
MAC address for which the file is
named. The settings in the "aastra.cfg"
file will be overriden by the settings
which also appear in the <mac> cfg file.