6.3.1.3
Removing the dummy cover
I
Remove the dummy cover before installing the second power supply
module.
Figure 39: Removing the dummy cover
Ê Press the two grips together as indicated by the arrows (1) and remove the
dummy cover (2).
V
CAUTION!
Keep the dummy cover for future use. If the power supply module is
removed and not replaced with a new one, the dummy cover must be
reinstalled due to cooling, to comply with applicable EMC regulations
(regulations on electromagnetic compatibility), and to protect against fire.
RX100 S7
Upgrade and Maintenance Manual
Power supply
121