Installing A Second Psu; Removing The Dummy Cover; Installing A Psu - Fujitsu PRIMERGY RX2530 M5 Operating Manual

Operation
6.3

Installing a second PSU

6.3.1

Removing the dummy cover

Figure 30: Removing the PSU dummy cover
Ê Press in on both release latches (1) and remove the dummy cover (2).
V
CAUTION!
Keep the dummy cover for future use. If a PSU is removed and not
immediately replaced by a new one, a dummy cover must be installed in
the bay again to comply with applicable EMC regulations and satisfy
cooling requirements.
6.3.2

Installing a PSU

Figure 31: Folding up the handle
Ê Push the handle of the PSU halfway upward in the direction of the arrow.
86 Operating Manual
RX2530 M5