Preparations
4.1.3.2
Removing a server dummy cover
Figure 11: Removing a server dummy cover (A)
Ê Press out and to the left on the locking lever to disengage the locking
mechanism.
Figure 12: Removing a server dummy cover (B)
Ê Rotate the dummy cover in the direction of the arrow (1) and remove it from
the installation bay (2).
Ê When installing a server after removing the dummy cover, fit two cage nuts
in the middle notches on the left and right support uprights (see figure
page
21).
28
Service Supplement
5 on
PRIMERGY CX120 S1