Installing The New Fan/Odd Power Cable - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Cables
Figure 274: Disconnecting the fan/ODD power cable from the system board
Ê Disconnect the fan/ODD power cable from the system board.
Ê Remove the fan/ODD power cable.

16.3.4 Installing the new fan/ODD power cable

Figure 275: Connecting the fan/ODD power cable to the system board
Ê Connect the fan/ODD power cable to the connector "FAN SYS" on the
system board.
396 Upgrade and Maintenance Manual
RX100 S7