Cables
Ê Thread the cable through the recess (see circle) and remove the SGPIO
cable.
16.6.4 Installing the new SGPIO cable
Figure 290: Connecting the SGPIO cable to the system board
Ê Connect the SGPIO cable to the connector "BP SGPIO" on the system
board.
Ê Route the SGPIO cable as before.
Figure 291: Connecting the SGPIO cable to the SAS/SATA backplane
Ê Connect the SGPIO cable to the SAS/SATA backplane.
408
Upgrade and Maintenance Manual
RX100 S7