Installing The Bbu In The Holder - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Ê Connect the BBU cable to the BBU.
V
CAUTION!
Make sure that the connector side with the three dots is on the top (see
close-up). Otherwise you risk short-circuits.

16.10.9 Installing the BBU in the holder

Figure 320: Installing the BBU in the BBU holder (A)
Ê At a slight angle, fit the BBU under the right retaining bracket on the BBU
holder (1).
Ê Fold down the BBU until it locks in place (2).
RX100 S7
Upgrade and Maintenance Manual
Cables
431