Replacing The Front Lan Card; Required Tools; Preliminary Steps; Removing The Riser Module 1 - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

14.3.4 Replacing the front LAN card

Field Replaceable Units (FRU)
Average task duration: 5 minutes
V
CAUTION!
Follow the safety instructions in chapter
page 43.

14.3.4.1 Required tools

Preliminary and concluding steps: tool-less
●
Main steps: tool-less
●

14.3.4.2 Preliminary steps

Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Shutting down the server" on page 59
3. "Extending/removing the server from the rack" on page 60
4. "Opening the server" on page 64

14.3.4.3 Removing the riser module 1

Ê Remove the riser module 1 as described in section
module 1" on page

14.3.4.4 Removing the defective front LAN card

Ê Remove the front LAN card as described in section
card" on page
RX100 S7
336.
336.
Upgrade and Maintenance Manual
Management and diagnostics modules
"Important information" on
"Removing the front LAN
"Removing the riser
343