Installing The Riser Module 2; Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
9.4.4.6

Installing the riser module 2

Figure 131: Installing the riser module 2
Ê Insert the riser cards into the system board slots.
Ê If necessary, connect the cables to the other components.
9.4.4.7

Concluding steps

Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Switching on the server" on page 72
4. "Enabling BitLocker functionality" on page 94
5. "Closing the rack door" on page 73
216 Upgrade and Maintenance Manual
RX100 S7